|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NUP6101DMR2 Unidirectional TVS Array for High-Speed Data Line Protection The NUP6101DMR2 transient voltage suppressor is designed to protect equipment attached to up to six high speed communication lines from ESD, EFT, and lightning. Features: http://onsemi.com * Micro8 Package * Peak Power - 300 Watts 8 x 20 mS * ESD Rating: IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact) IEC 61000-4-4 (EFT) 40 A (5/5 ns) IEC 61000-4-5 (lightning) 23 A (8/20 ms) UL Flammability Rating of 94 V-0 High Speed Communication Line Protection 5.0 V Data and I/O Lines Microprocessor Based Equipment LAN/WAN Equipment Servers Notebook and Desktop PC Instrumentation 1 2 3 4 8 7 6 5 * * * * * * * * Typical Applications: MARKING DIAGRAM 8 Micro8 CASE 846A 1 6101 AYW MAXIMUM RATINGS Rating Peak Power Dissipation 8 x 20 ms @ TA = 25C (Note 1) Peak Pulse Current 8 x 20 ms @ TA = 25C (Note 1) Junction and Storage Temperature Range Lead Solder Temperature - Maximum 10 Seconds Duration Symbol Ppk IPP TJ, Tstg TL Value 300 17 -55 to +150 260 Unit W A 6101 A Y W = Device Code = Assembly Location = Year = Work Week PIN ASSIGNMENT C C Source Source Source Gate 1 2 3 4 8 7 6 5 Drain Drain Drain Drain 1. Non-repetitive current pulse 8 x 20 mS exponential decay waveform Top View ORDERING INFORMATION Device NUP6101DMR2 Package Micro8 Shipping 4000 Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2004 1 March, 2004 - Rev. 1 Publication Order Number: NUP6101DMR2/D NUP6101DMR2 ELECTRICAL CHARACTERISTICS Characteristic Reverse Stand-off Voltage Reverse Breakdown Voltage @ It = 1.0 mA Reverse Leakage Current @ VRWM = 5.0 Volts, T = 25C Maximum Clamping Voltage @ IPP = 1.0 A, 8 x 20 mS Maximum Clamping Voltage @ IPP = 5.0 A, 8 x 20 mS Maximum Peak Pulse Current Junction Capacitance Between I/O Pins and Ground @ VR = 0 V, 1.0 MHz Symbol VBRWM VBR IR VC VC IPP CJ - - Min - 6.0 - - Typ - - - - - - - Max 5.0 - 20 9.8 11 17 400 Unit V V mA V V A pF 1000 Ppk, PEAK SURGE POWER (WATTS) % OF PEAK PULSE CURRENT 100 90 80 70 60 50 40 30 20 10 0 0 tr PEAK VALUE IRSM @ 8 ms PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 ms HALF VALUE IRSM/2 @ 20 ms 100 10 NOTE: Non-Repetitive Surge. 1 1 10 t, TIME (ms) 100 1000 tP 20 40 t, TIME (ms) 60 80 Figure 1. Pulse Width Figure 2. 8 x 20 ms Pulse Waveform http://onsemi.com 2 NUP6101DMR2 12 VC, CLAMPING VOLTAGE (V) 10 DERATING FACTOR 8 6 4 2 0 0 5 10 15 20 25 30 IPP, PEAK PULSE CURRENT (A) 1 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 10 s 0.01 0.1 0.2 0.5 1 2 5 10 D, DUTY CYCLE (%) 20 50 100 100 s PULSE WIDTH 10 ms 1 ms Figure 3. Clamping Voltage versus Peak Pulse Current Figure 4. Typical Derating Factor for Duty Cycle IR, TYPICAL LEAKAGE CURRENT (mA) 8 7 SERIES 1 6 5 4 3 2 1 0 -100 -50 0 50 100 150 200 t, TEMPERATURE (C) Figure 5. Typical Leakage Current versus Temperature http://onsemi.com 3 NUP6101DMR2 PACKAGE DIMENSIONS -A- Micro8 CASE 846A-02 ISSUE E K -B- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. DIM A B C D G H J K L MILLIMETERS MIN MAX 2.90 3.10 2.90 3.10 --- 1.10 0.25 0.40 0.65 BSC 0.05 0.15 0.13 0.23 4.75 5.05 0.40 0.70 INCHES MIN MAX 0.114 0.122 0.114 0.122 --- 0.043 0.010 0.016 0.026 BSC 0.002 0.006 0.005 0.009 0.187 0.199 0.016 0.028 PIN 1 ID G D 8 PL 0.08 (0.003) M TB S A S -T- PLANE 0.038 (0.0015) H SEATING C J L Micro8 is a trademark of International Rectifier. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 4 NUP6101DMR2/D |
Price & Availability of NUP6101DMR2 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |